Zhengzhou City, Canada
Our Products
At present, the research on the recycling of waste lithium batteries is mainly focused on the recovery of high-value anode precious metals cobalt and lithium. Copper in the negative electrode of waste lithium battery( content up to 35%) is an important production raw material widely used Carbon powder adhered to it can be used as additives such as plastics and rubber. Based on the structural characteristics of lithium batteries, our company adopts an environmentally-friendly physical separation process to realize efficient separation and recovery of waste lithium batteries. The lithium battery recycling production line is used for dismantling and recycling the Soft package battery, cellphone battery, Shell batter Cylindrical battery etc. The final products of this plant is Graphite powder, Cobalt acid lithium Aluminum and Copper.
The equipment has strong stability under long-term heavy lod.There are a variety of models to choose from, well-known brand reducer.
Scrap Steel Iron Aluminum Motor Stator Scrap Recycling Machine Hammer Mill Crusher Metal Shredder
1. The Meatball Motor Stator Hammer Mill For Iron Copper Aluminum Recovery can process scrap electric rotor, stator, wire bundle and transformer from household appliances, electric tools, etc. After processing, you can get copper, iron and non-metal.
2. It mainly includes hammer crusher, knife crusher, magnetic separator, air separator, pulse dust collector and other accessory machines.
Single Shaft Shredder Machine adopts European advanced technology, is mainly applied in the crushing and recycling of various thick wall scrap materials and leftover materials in the plastic and rubber industry, can effectively crush extra thick, strong toughness and large materials.
Crinkle Cut Paper PP Raffia Shredder Paper Shredder Machine
Four Sides Sealing Wet Wipe Packaging Machine is designed as automatic production solution for sanitary wet wipes and make-up removing wet wipe and personal care wet wipe
Automatic wet wipes packaging machine, suitable for 1-10 pieces of wet wipes machine, its operation is simple and stable. The parts that come into contact with the liquid are all made of stainless steel, and the whole machine is controlled by PL C, and the machine is beautiful.
ZY series wet wipes production line is used to produce disposable household cleaning wet wipes or baby wipes. Fully automatic wet towel production equipment can meet the needs of enterprises for high production capacity, and multiple models of products can be selected, with production capacity of 400pcs/min- 16000pcs/min; Packing: 10pcs/bag-80pcs/bag, large cloth cutting range with large throwing knife, automatic connection between cloth placing frame and film placing shaft, reduced time for replacing raw materials, and effectively improved working efficiency; On-line inspection of cloth joints and on-line removal of connection joints ensure the quality of products.
Equipment operation and Work Flow: The slitting and Rewinding Machine Unwinding, point breaking, slitting and rewinding from large rolls of non-woven fabrics into small rolls manually put the small rolls into the bottle Put the bottle onto the unscrambler transportautomatic quantitative liquid filling automatic film sealing automatic capping automatic labeling finished product output.
Our Electronic Waste PCB Recycling Equipment E-waste Recycling Machine help you get metals, resin powder and fiber powder from used Printed Circuit boards. Suchas, waste computer boards, waste cellphoneboards, waste TV boards pcb scrap etc.
Because of the high value of the metals, fiber and resin, there is no doubt that thisseriesplantsnotonly help to changewastetotreasure, butalsobring greateconomicbenefits.
Waste Radiator Recycling Equipment can processing all kinds of large blocks of radiator(copper and aluminum water box) or motor rotor(with axle)15cm.
The material be shreddered and then crushed into 3cm particles. Through the magnetic separator, iron is separated. Then the airflow separator can sort the copper, aluminum, plastic. The equipment has features of new design, nice appearance, unique and large capacity. Whole plant PLC controlling, one time feeding, multi machine cooperated processing; with automatic shutdown device and the overload automatic alarm device. Successful development of the processing line, greatly liberate the productive forces, improve the metal recycling quality. The most important, it solves the problem of dust overflow effectively, reducing the pollution to air.
Copper electrolysis machine is used for refine the copper from the mixed metal powder, the purity of finished copper is as high as 99%.
The Separated metal part be smelted and cast into anode board for the process of copper electrolysis. since a large number of non-ferrous metals, rare earth metals and precious metals are used in the production of the circuit board , if in conventional electrolytic method, the anode often get passivated and causing electrolysis can not work normally. Here we suggest adopting pulse automatic pole changing electrolysis system, it not only solve the anode passivation problem effectively, but also help anode mud loose off. The time is set and adjusted arbitrarily by the control cabinet.
SunyGroup is specialized in providing Complete E Waste Recycling Plant. Turning E-waste into treasure through different equipment not only solves the problem of environmental pollution, but also realizes resource recycling and reuse, and can also obtain high economic benefits.
Gold Deplating System was specially designed to strip gold from gold-plated materials that come from those obsolete and junked electronic products, which is currently the best gold extraction method. By using this system, the recovery rate of gold is up to 99%, and you can get high-purity gold after further refining.
Gold Deplating System applies to various gold-plated scraps generated in our daily life, such as waste cellphone circuit boards, computer CPUs, motherboards, VCDs, DVDs, TVs, game consoles, fax machines, telephone sets and many other old domestic appliances, as well as those leftovers and off-cuts from the electroplating factory, electronic components manufacturing factory, printing house, photosensitivematerialsplant.
Automatic Components Dismantling Machine is used to remove the electrical components from the waste PCB.Because the components are with different precious metals and some parts can be sell separately and directly with a better price.And the mother boards after remove the components are easily to crush and separate the copper. It reduces the work of the next step, and make the precious metals can be recovered more.
Precious Metal Refine Machine is used for refine the precious metal(such as gold, sliver, platinum, palladium) from the kinds of e-waste board.
In intermediate frequency furnace and converting furnace process smelting reduction and oxidation smelting, then do water broken to refining the precious metal alloy block, and then go through the extraction of precious metals to extraction separation and refining various precious metals. In the workshop, all local produce exhaust must be established with the ozone absorption device, all local produce liquid must set up the tail liquid guiding device, make the tail liquid fluid into waste water treatment plant, after the standard can be discharge into or reuse.
Aluminum-Plastic Recycling Machine is used for recovery of waste aluminum-plastic materials, can put the aluminum and plastic separation, it is mainly used for all kinds of aluminum tubes, aluminum-plastic bottle caps, car ornaments, and other plastic products separation recycling.
Cable Wire Recycling Machineis dry type structure, mainly used to all kinds of waste copper wire, the copper wire will be separated into tiny copper rice and PVC. This machine can recycle the copper wire which diameterer is 0.3mm-20mm. Automobile electrical wire or the electric wire of car, motorcycle electric wire, computer case wire and communication calbe, etc.
Best Electric Motor Scrap Processing Copper Motor Recycling Machine Price is a kind of waste motor/ waste motor and stator and heavery duty, it can help you to process more easily and efficient. The machine has 3 main parts, one is cutting part for all motor stator , second is grab copper part from small motor stator , last one is extract copper from big motor stator . It's very cost-effective and convenient in using.
Double Shaft Shredding Machine is suitable for all kinds of hollow containers: plastic beverage cans, plastic buckets, iron drums, packing boxes, packing drums; automobile housing, aluminum alloy, scrap cast aluminum parts, engine housing, lead and steel plates with thickness below 5mm, etc.
This machine is mainly used for the automatic making of flat masks: the whole roll of fabric is driven by rollers after unwinding, and the fabric is automatically folded and hemmed; Bridge of nose strip whole roll traction unroll, cut to length and guide into hemmed fabric. Two sides Ultrasonic welding to the seal, then ultrasonic 2 ends sealing, cutting and shaping by a cutter; conveying the mask to the two mask ear band welding stations through an assembly line, and finally forming the mask by ultrasonic welding; when the mask is made, it is transported to the flat belt line for collection. Complete line include 1 set mask body making machine and 1 sets ear loop automatic welding machine.
The face mask machine will finish all the processing from the feeding to nose-clip fixing, edge sealing, cutting the finished products automatically, complete line include 1 set mask making machine and 2 sets automatic ear loop welding machine.
