British Columbia, Canada Verified Supplier
Our product range comtains a wide range of PV500 Industrial Vacuum System, Material Transfer System, Barrel Vacuum System, Industrial Vacuum Transfer System and PV250 Industrial Vacuum System
We Pump the Un-pumpable!
We are a Manufacturer, Exporter and Supplier of Barrel Vacuum System. Our Barrel Vacuum Cleaners performs extremely well in a variety of material clean-up environments. The Barrel Vacuum Systems we offer are a safe solution for oil spills, handling of sand, sawdust, sludge, and general debris in many mines, mills and factory applications. Note : For technical information, specifications and pricing, please contact us.
IVACs latest innovation is the MTS 500 (Material Transfer Systems) . We have designed the MTS as an in line system that allows the use of a standard pipeline into a fixed vacuum system. Our Material Transfer System can be fitted into a range of pipes including steel and flexible suction/discharge hose and combinations thereof, offering considerable flexibility. Operating on compressed air, the MTS 500 provides consistent deliver of up to 25"hg+ of vacuum, enabling the uptake and transfer of the most difficult materials over great distance. Our Material Transfer System can be installed on small diameter tunnel boring systems to be used in hard rock where line and grade are critical. Although this Material Transfer System (MTS 500) was designed specifically for use with long bores, where difficult ground conditions make it almost impossible to remove spoil, the MTS 500 will meet any application requirement where small confined areas call for extraction and removal of material over a great distance Note : For technical information, specifications and pricing, please contact us.
Our flag ship Industrial Vacuum Transfer System , trade name PV 500, picks up your desired material and then delivers it to your required location through a pipeline. The standard PV 500 is capable of transferring your product over 2 kilometres away from the original pick up point. The venture type Vacuum/Discharge unit is powered with compressed air. No wiring or electrical connections are required. An internal 12-volt system, with on board recharge system, runs all the controls. The operator flips a switch and starts delivering product. It can even be setup to run automatic or remote start - depending on your desired application. Material 4â�� minus including rock, gravel, sand sludge and slimes wet or dry, the material is handled easily with our Industrial Vacuum Transfer System. The Industrial Vacuum Transfer System that we provide creates up to 25â�� H.G. DPV 1200 We also manufacture the DPV 1200, which is our larger, double tank unit. The DPV 1200 has similar attributes to the PV 500, but with the capability of achieving even greater transfer rates. The unit produces continual throughput of material from intake to discharge. For further technical information, specifications and pricing, please contact us. PV 500 Specification C.F.M @ 100 P.S.I Air Consumption : 500 Vacuum Loading rate : 58.7 S.C.F.M @ 25 â�� H.G Control Power (batteries) : 12 Volt D.C Charging with 110 or 220 volt A.C Operator Controls (Man/Auto Vacuum/Discharge): Also Reverse Vacuum NEW! Height : 108 cm Width : 187 cm Length : 193 cm Vacuum Inlet : 4â�� Cam Lock Discharge Outlet : 4â�� Victaulic Air Inlet : 2â�� N.P.T Pressure Vessel : Certified Weight : 1131 Kilograms Features Skid Mounted c/w forklift lift points The PV500 Vacuum unit cycles from vacuum to discharge when the pressure vessel is filled with the material being vacuumed. This is set by the operator on a timer located in the control box Overfilling will not damage the unit. Material being vacuumed does not come in contact with any moving parts. Handles wet or dry material, sludges, slurries, sand, gravel, and rock. Batteries are good for approximately one-month continuous operation before recharge. Virtually maintenance free as there are only three moving parts (knife gate valves). There are no filters to clean or replace. Note : For more information, specifications and pricing, please contact us.
Our machines specialize in pumping aggregates and hard to pump materials.
We are counted amongst the renowned Manufacturers, Exporters and Suppliers of Vacuum and Material Transfer Systems. The Hopper Vacuum System , we offer is designed as to meet and exceed industrial standards using high quality parts and components. Our Hopper Vacuum System is one of a kind and unmatched in terms of performance, and durability. Note : For technical information, specifications and pricing, please contact us.