Easy Kleen Pressure Systems Ltd

New Brunswick, Canada

Features

• Pump - Industrial Duty General triplex plunger pump with oil bath crankcase, stainless valves and all brass manifolds, most pumps are belt driven, although we do offer flange and coupling driven pumps as well.
• Motor - Heavy Duty full 1.15 service factor TEFC 1750 rpm overload protected Electric motors. (3 phase are high efficiency)
• Other -Liquid filled pressure gauge, Fully adjustable pressure regular and chemical injector, thermo pump protection, 50 ft hose, gun and wand with five nozzles.
• Drive -Continuous duty V belt drive system with 11 gauge belt guard or flange and coupling drive.
• Electrical Control Panel - Electrical Nema 4 water tight control panel complete with hinged cover for easy access is mounted within frame for protection. Available with standard on/off or optional auto stop start with shut down timer both use top of the line electrical components. All CSA approved.
• Frame - Super Heavy Duty caged frame assemble with 1 ½" square tube frame with lift bar and 1/4" motor/pump base plate all components enclosed with in frame and mounted on large 8" casters. Frame has capacity for two 400' industrial duty reels as they are used on the two gun units. Also available in a rugged stationary base (ST). Mills, Plants and other heavy users require great equipment and we have the need to meet the requirement of our customers every day. (Hose reels are optional)

It Contains :

• Auto Stop Start

• 100 Feet of Non-Marking Hose

• 150 Foot Hose Reel

• High Pressure Chemical Injector

Optional Remote For:

• Hose Reel In
• Motor OFF and Speed Control
• Pressure ON/OFF

Multi – Stage

• First Stage: Pre Rinse – pumped from third stage rinse tank – drained to Plant drain.
• Second Stage: Wash – Pressurized high volume hot chemical. Wash-recycled through filter and steam heated tank.
• Third Stage: Clean Rinse – Pressurized high volume Rinse – recycled through filter and cold water tank.
• Fourth Stage: Sanitized – main pressure injection of chlorine up to 200 PPM and drain to plant.

Conveyor System:

• Dual 2060 stainless steel conveyor chain run in nylon grooves. (Optional third length chain system)
• SS drive shafts and sprockets.
• Nylon flanged type sealed bearings.
• Adjustable chain speed controller.
• SS 304 square tubing and angle framework.
• SS 11 and 16 gauge shrouding and sheet metal work.
• Poly Neoprene curtains between stages and on each end.
• Tension adjuster.
• Adjustable guild rails for different size tote and tray.

Nozzle Manifold System:

• All stainless steel nozzles and manifold piping.
• SS adjustable angle ball-joint.
• High Impact inner tote cleaning nozzle.
• Easily adjustable to height of container for maximum impact.
• Rugged access doors for easy maintenance.

Pumps Systems:

• Industrial grade continuous duty.
• Seal less, vertical pump designed for no maintenance.
• Proven in pumping high volume high temperature chemicals and dirty fluids.
• TEFC, 575 Volt, 3 Phase Motors.
• Wash stage pump – 10 HP, 175 GPM, 70 PSI.
• Clean rinse stage pump – 7.5 HP, 125 GPM, 70 PSI.

Tanks System

First Stage:

• Drip Tray catches all sprayer debris and drained fitting to connect to plant drains.

Second Stage:

• 175 Gallon SS insulated tank.
• SS Steam heating manifold.
• (Optional) 40 KW 600 volt electrically heated tank
• Temperature controller turns on and off steam valve.
• Temperature gauge.
• Low water pump cut out.
• Automatic refill float valve.
• Large drain valve and sloped for fast and easy wash out.
• Large rectangular filter basked to catch foreign material before being repumped to nozzles.
• (Optional) P.H. controller, sensor and chemical pump to control and maintain chemical strength in tank.)

Third Stage:

• 125 Gallon SS Tank
• Large drain valve and sloped for fast and easy wash out.
• Automatic refill float valve.
• Low water pump cut out.
• Large rectangular basket filter to catch foreign material before being pumped through nozzles.

Fourth Stage:

• Drip tank catches all and drains to plant.
• (Optional) Sanitizer recycle is available, although mostly not recommended, only for iodine base disinfectant.
• (Optional ORP controller, sensor and chemical pump) To control and ensure sanitize strength.

Control Panel:

• Control panel mounted to system.
• Stainless Steel Nema 4 water tight.
• Prewired to all components on system.
• Complete with all necessary starters, overloads, fuses, control transformers, indicator lights and controls as required.

Options (Please Call for Pricing):

• PH – Control System
• ORP – Control System
• Electrically Heated Package – 40KW
• Third Run of Conveyor Chain
• Recycling Sanitizing Pump and Tank System

• Pump - Heavy Duty Triplex Plunger Pump • Oil Bath Crank Case •Stainless Valves • Brass Manifold • Direct Drive • Thermo Pump Protector
• Control Panel - Nema 4 • Water Tight • Easy Access •Heavy Duty On / Off Cam Switch
• Coil - Schedule 80 Pipe • Elliptically Wound & Stretched • No Seam Welds • Structurally Braced to Reduce Vibration & Pipe Wear • Sealed with Ceramic Blanket • Stainless Steel Housing
• Burner - Oil Fired • Adjustable Thermostat • On/Off Switch • North American Made • Dependable • Serviceable
• Frame - All Welded • Powder Coated • 40 Gallon Internal Fuel Tank • Forklift Slots and Lifting Eyes • Optional Wheel Kit Available
• Safety Features - Electronic Thermostat with Deviation Control • Safety Valve • Flow Control