Hong Kong, Canada
Our Products
In addition to the extended range power supply 24.230 Vac / Vdc, ATR401 also integrates all options for sensor readings and actuator control into a single device. With dual universal analog inputs and outputs that can be configured as relays or SSRs, users or retailers can reduce inventory requirements. This series also includes models with serial communication RS485 / Modbus-RTU and analog output 0-10 V, 0/4-20 mA. The memory card with built-in battery simplifies the possibility of copying parameterization, without the need to power the controller.
The ATR144 Modbus Panel Indicator is a multi-purpose panel meter which can act as single channel Modbus RTU Slave. It is also a Digital Panel Indicator with one or two relays output for high or low alarms. A PID Controller with one or two control relay outputs. The ATR144 provides 2500V Isolation between the power supply, signal input and output. The ATR144 panel meter can accept 24 to 230 Vac or DC power supply at 6 watts.
Price : USD 136 -per- Box
The CAN 300 PRO module of Systeme Helmholz GmbH used in Siemens S7-3001 allows the CAN station to be connected to a programmable controller. The module can be inserted into the central controller or expansion unit. The CAN 300 PRO module supports CAN 2.0A (11-bit) and CAN 2.0B (29-bit) frames, and the baud rate can be freely selected, ranging from 10 kbps to 1 Mbps. The CAN 300 PRO module can send and receive CAN frames in layer 2 operation mode. The CANopen slave data can be processed as a process image in the PLC's CANopen master operation mode. can also be used as a CANopen slave application. Provides application examples for standard applications, including motor control using CANopen. Also provides data processing module for SAE J1939 protocol. CAN 300 PRO module contains 16 freely settable timers. Each timer can trigger a freely programmable CAN message. In this way, the CAN 300 PRO module can be used to easily realize the common synchronization protocol in the drive and servo system.
The Unitronics Samba series are a full-function control solution designed for relatively simple automation applications. The Samba all-in-one Programmable Logic Controller has an integrated touchscreen, measuring either 3.5, 4.3, or 7, and offers onboard I/O in six possible configurations. The Samba also offers features that allow it to compete with high-end PLCs, including a range of supported communication protocols, data logging and Trend capabilities plus a built-in alarm management system. However, with pricing more like a push-button or smart relay system plus programming software and 24/7 technical support complimentary to all users, the Unitronics Samba offers excellent value for money.
The REX 100 router has been systematically designed to be used in conjunction with the myREX24 V2 portal: all programming and remote maintenance are only performed through the portal. Alerts can be sent in the form of SMS and email through the myREX24 V2 portal through digital input. All devices have USB host ports, which can be connected to USB devices (for example, the programming port of the drive) through the remote maintenance tunnel (USB-over-IP).
REX 100 WAN is equipped with a WAN port, through which a connection to the myREX 24 V2 portal can be established. You can connect other Ethernet participants to other available RJ45 ports on the router through the integrated 3-port switch. For data transmission, our industrial routers use encrypted VPN tunnels based on the secure OpenVPN protocol.
dual range/dual resolution opposed mode ultrasonic sensors; ideal for reliable sensing of clear objects or materials
rugged design for use in demanding environments: rated nema 6p (iec ip67), wide operating temperature range of 40 to +70c
alignment indicator flashes at a rate proportional to the received signal strength highly immune to ambient sonic and electrical noise
popular t-style right-angle sensor package with 18 mm threaded mounting hub; cabled or quick disconnect models
12 to 30v dc operation; choose receivers with either npn (sinking) or pnp (sourcing) output; outputs are short-circuit protected
.
The ELNet LT Energy & Powermeter is a compact, multi functional, three-phase Powermeter simple to install and is especially designed to integrate into Building Management Systems. It requires no special mounting and is ideally suited for mounting on the front face of any standard electrical panel.
rugged design
control by a low or line voltage spst or spdt controller
minimal actuator power consumption
pressure differential up to 4 bar
double insulated actuator
quick connect electrical connections
quick and easy replacement of moving parts
actuator head installation does not require draining of the system
high flow rate capacity
.
1. Universally applicable as a tachometer, timer, shift counter, batch counter
2. Easy to operate
3. Four different backlight colours
4. Intensity of backlighting can now be adjusted
5. Large, clearly readable 48 x 48 mm display
6. Input frequency up to 60 kHz
7. Easy installation via plug-in terminals
8. Three presets
The Vision130 is a palm-sized PLC with a built-in Operator Panel. The panel offers a graphic display screen and keypad. This small, powerful device supports up to 256 I/Os (onboard plus expansion modules). A rich range of embedded features include multiple auto-tuned PID loops, internal 120K structured data table, loadcell support, and communication options such as Ethernet, GSM/SMS, MODBUS, CANbus, function blocks that enable Vision to communicate with devices using proprietary COM protocols, plus remote access and data export software utilities.
The Graphic HMI display screen can show images, text, and graphs according to real-time parameters. It can also display graphs based on historical values, to reflect trends of recorded data. Vision130 supports up to 1024 user-designed screens, and up to 400 images per application.
The Vision130 is unique: it enables engineers and systems designers to benefit from a powerful PLC and a graphic HMI within a bare minimum of budget, cabinet space, and wiring.
270 is Setra's highest performance analog sensor for atmospheric pressure, absolute pressure and gauge pressure measurement. It has built a reputation for reliability over decades of installation value, and is still a reliable choice for critical installations. The ceramic sensor on the 270 can provide high performance;Its accuracy of 0.03% FS in a wide temperature range is better than similar sensors on the environmental sensing market. 270 provides a variety of options to meet the needs of difficult applications, making it easier to install and collect higher-quality data for your project.
4 or 6 contacts max. 10 a switching and constant current drive available as dc monostable, dc bistable, ac monostable and as load-current controlled ambient temperatures -25 to +80 c forcibly guided contacts to en 50205, application type a meets requirements for signal relays under uic 736e culus and tv approvals
