Faria Nascimento Import Export , Ontario

The company is a highly acclaimed Exporter and Supplier of Compact Encoders in Canada. The Compact Encoders are available in a diameter of up to 70 mm. The Compact Encoder is an Angular Position Transducer which generates electric signals in square wave form by rotating on its axis. The Compact Encoder is designed for operation in industrial area, under severe conditions of humidity, temperature and vibration, with high reliability and durability. The Compact Encoders are fixed by the hollow shaft, eliminating the use of coupling and alignment. Highlights Of Compact Encoders High reliability under all conditions of use Rugged for industrial application (Heavy Duty) Output signal incremental Electrical Features Of Compact Encoders Pulse Output : 1 to 2500 pulses per revolution (PPR), direct in any proportion Output Channels : Two (A and B) lagged by 90 o (±20 o ), square wave Output channel reference Amplifier output to differential binding (A/A, B/B, Z/Z) Maximum Response Wrist : 100 KHz Time of ascent and descent of the wrist : £1ms Amplitude of output signals with load 20mA : 7 to 27V (proportional to power) or 5V Supply Voltage : 5 to 30Vdc Current consumption without load on outputs : 70mA maximum Protection against over-voltage and reverse polarity Maximum output current per channel recommended in operation : 100mA Protection against short-circuit the output in continuous Isolation Voltage : 2KVef by 1sec Operating Temperature : -10 o C to +80 o C Relative humidity of the operating environment : 98% Electrical Connections cable, connector or terminal block Mechanical Features Of Compact Encoders Circular aluminum housing with fixing by own axis Maximum Speed : 6000 RPM Stainless steel shaft Hole Diameter Internal Shaft : 6 to 25mm Bearings : Shielded bearings Moment Of Inertia : 120 g cm 2 Torque (moment of departure) : 3Kgf cm Vibration : Maximum Strength In Axis : 2x103 Kgf axial, radial 2x103 Kgf Degree Of Sealing : IP66 and IP67 Dimensions : 70 mm diameter, 50 mm thick Weight : 0.5 kg

The company is one of the most sought-after Exporters and Suppliers of Ultrasonic Rangefinders in Canada. The Ultrasonic Rangefinders use the digital ultrasonic technology for measuring distances without contact. This tchnology uses sonic waves to measure, distance, length, height, levels of solids and liquids wothout contact, and is also applied as a safety against collision of mobile machinery. The reading made by the Ultrasonic Rangefinders, in addition to being displayed on the digital display, is also transmitted by analog voltage or current, as well as digital signal interface RS485 serial communication. The special design of the Ultrasonic Rangefinders is the result of using state of the art components, and its rugged construction makes them versatile and ideal for harsh environments such as those found in industrial areas and ports. Key Features Of Ultrasonic Rangefinders Measuring Range : up to 30m 8cm (specify) Accuracy : ±0.1% of full scale, ±3 digits Linearity : ±0.1% of span Maximum number of measurement per second : 2 Measurement Resolution : 1mm Stability to temperature compensated Diameter of the cone, measuring approximately 10% of the distance from the target Programming for direct indication of level, distance and volume Three buttons mounted on the panel for programming Mode programming menu panel Preset initial measurement programmable, local validation Display of the local 7-segment LEDs 7mm in height measurement for presentation, visualization functions and parameters, plus an LED polarity Isolated analog output programmable and adjustable without trimpots for 0 to 10Vdc or 4-20mA proportional to the measuring range programmed Serial communication interface RS485, isolated, with MODBUS-RTU (optional) Four independent outputs programmable limits, with comparison operation on the measured value of ( ) with digital output for isolated solid state 0.1 A / 60Vmax or relay contact NO or NC (configurable) to 5 A / 250 VAC (resistive load) A digital output or isolated solid state relay for supervision failures Data retention in case of failure/lack of energy (without batteries) A constant division and multiplication independent, programmable, -9999.9999/-0, 0001/0/0.0001/9999.9999;-point conversion to decimal measures Universal Power Supply : 42 to 270V ac / dc or 10 to £ 10W 30V 0.3 A (optional) Operating Temperature : Up to 60°C and cooling to 120°C with water cooling Electrical connection for robust connector (plug male/female) Mounted on aluminum box, protective hood, stainless steel pipe for cooling with water, with the possibility of using compressed air to prevent entry of dust, fixing the foot with vertical and horizontal adjustment, or by flange Dimensions : 140 mm in length, 180 mm in height and 80 mm depth Degree Of Sealing : IP 65 Weight : 2.5kg.

We are a major Exporter and Supplier of Digital Inclinometers in Canada. The Digital Inclinometers are used for the measurement of vertical angles. The Digital Inclinometer is a micro-machined electronic equipment, designed to measure vertical angles in industrial and port areas, including in places where there may be loss of position data even when powered down. The angular position determined by Digital Inclinometers is displayed via a LED display on the front panel or via remote isolated outputs, RS485 and analogue. Being programmable, the Digital Inclinometer allows great flexibility for installation, calibration and configuration. Electrical Features Of Digital Inclinometers Measuring Range : 360 o (programmable) Indication : Red LED on display with 14mm tall, 5 digits with polarity sign and decimal point Digital Display Resolution : ±0.18 o Digital Output : RS485 with MODBUS-RTU, with up to 1600 VRMS isolation Analog Output : 4 to 20mA isolated, charge £ 500ohms Analog Output Resolution : 12 bits Accuracy, Repeatability And Linearity : ±0.1% of full scale Calibration of zero and analog gain by panel Four buttons and two auxiliary displays for indication and programming parameters Preset initial position and direction of movement programmable angular Digital filter 0 sec to 30 sec (programmable) Data retention in case of failure/lack of energy Power : 18 to 30Vdc or 85 to 100mA 270Vca / VDC - 5W Mechanical Properties Of Digital Inclinometers Body in anodized aluminum fixing the base with 110 mm diameter and 130 mm depth Operating Temperature : 0 o C to 60 o C Degree Of Sealing : IP 65 Size photo model, installed on polyester box with 310 mm height, 215 mm width and 285 mm depth Weight : 1.8 kg

The company is a well-established Exporter and Supplier of Hot Metal Detectors in Canada. The Hot Metal Detector is a photocell sensitive to infrared radiation emitted by metals at a temperature above 250 o C as wires, bars and plates etc. A digital output is provided due to the presence of hot metal found, regardless of the section and the position of the metal within the field of view. An analog output proportional to the intensity of the radiation detected metal is available. The special design of the Hot Metal Detector is achieved using microcontrollers last generation, their communication interface RS 485 (optional) and their robust construction make this photocell versatile and ideal for harsh environments such as those found in steel industries. Key Features Of Hot Metal Detectors Angle of vertical field of operation : 0 o to 30 o HMD-DI03865A and 0 o to 50 o HMD-DI03865B Horizontal Field Angle : maximum 3 o (adjustable) Detection Sensitivity : ~1 cm2 to 4 m away to the steel temperature above 250 o C Response time for detection of material : £ 2 ms Automatic control sensitivity Sensitivity adjustment without trimpots External control for exchanging isolated sensitivity range for detecting low (Lo)> 400 o C and high (Hi)> 250 o C Four digital outputs solid state 0/24 Vdc / 0.1 A with optical isolation related to : Inverse detection product Direct detection of the product Quality of the signal detected Fail : for food, internal cooling system, the engine speed and the operation of the microcontroller Relay output on the presence of the material : a changeover contact for 5Amax x 250Vac (resistive load) with transient protectors Output voltage or current analog, programmable and adjustable trimpots without (0 to 10 Vdc, 0 to 20 mA and 4 to 20mA, accuracy of ± 1% of range) proportional to the intensity of radiation Command the test panel and the connector for simulating the presence of hot metal, using infrared photodiode Serial communication interface RS485 with MODBUS-RTU (optional) Mira positioning laser "Point", activated by the test command Two LED displays 7-segment, 3 momentary contact switches and 2 LEDs located on the control panel, protected by a hinged cover, intended for programming, operation, and adjustment of detector sensitivity Power Supply : 110/220 Vac - 50 / 60Hz Electrical connection made through robust connector "plug" male/female 15-way Supplied in cast aluminum housing Stainless steel tubing for water cooling, tilting hood for protecting the window glass when the use of compressed air to prevent entry of dust Easy to install, adjust vertical and horizontal extent of sealing: IP65 Operating Temperature : 0 o C to 60 o C and cooling to 120 o C with cooling Dimensions : 464mm length, 284mm height, 100mm width Weight : 8kg

The company is a reliable Exporter and Supplier of Absolute Encoders in Canada. The Absolute Encoders, offered by the company, are known for their quality and high durability. The Absolute Encoder is an Angular Position Transducer that, by turning a back on its axis, generates analog and digital electrical signals without the loss of reference (even in the absence of power) due to its optical reading system in gray code parallel. The Absolute Encoders are designed for high levels of reliability and durability, with possibility of programming via PC software or on the panel. Highlights Of Absolute Encoders High reliability under varying conditions of use Rugged for industrial application Sealed against dust, humidity and gas Electrical Features Of Absolute Encoders Measuring Range : 1 turn - 360 o (programmable) with resolution of 11 bits Indication programming and local and/or remote (optional) Red LED display with 7 mm height 5 digits with polarity sign and decimal point Digital Display Resolution : ±0.18 o Programmable Analog Output : 4 to 20mA isolated, charge £500 Ohms Digital Output : RS485 with MODBUS-RTU, with isolation until 1600 VRMS (optional) Analog Output Resolution : 12 bits Accuracy, Repeatability And Linearity : ±0.1% of full scale analog Calibration of zero and analog gain made by the software (trimpot) Preset initial position and direction of rotation (programmable) Digital filter with constant RC 0.0 to 30 sec (programmable) Power Supply : 18 to 30Vdc or 85 to 100 mA 270Vca / dc 3w Electrical connection cable, connector or screw terminals in sealed box Mechanical Features Of Absolute Encoders Housing in anodized aluminum fixing the base, the shaft or flange holes. Stainless steel shaft Operating Temperature : 0 o C to 60 o C or even 120 o C (with optional water cooling) Degree Of Sealing : IP65 Weight : 1.8 kg

The company is one of the major Exporters and Suppliers of Hollow Shaft Encoders in Canada. The fixed axis Hollow Shaft Encoders are known for their quality and high durability. The rotary Hollow Shaft Encoder is an Angular Position Transducer, which generates electrical signals in square wave form by rotating on its axis. The Hollow Shaft Encoders are designed for operation in industrial area, under severe conditions of humidity, temperature and vibration, with high reliability and durability. These Hollow Shaft Encoders are fixed by the hollow shaft, eliminating the use of coupling and alignment. Specialties Of Hollow Shaft Encoders Output signal incremental High reliability under all conditions of use Rugged for industrial application (Heavy Duty) Sealed against dust, humidity and gas Electrical Features Of Hollow Shaft Encoders Incremental Pulse Output : 1 to 2500 pulses per revolution (PPR), direct in any proportion Response Maximum Pulse : 100 KHz Time of ascent and descent of the wrist : £ 1 ms Output Channels : square waves, lagged 90 o (±20 o ) Amplifier output to differential binding (A/A, B/B, Z/Z) Operating Temperature : -10 o C to +80 o C Amplitude of the output signals with load 20mA: 7V to 27V (proportional to power), or 5V Maximum output current per channel recommended in operation : 100mA Current consumption without load on outputs : 70mA maximum Protection against short-circuit the output in continuous Relative humidity of the operating environment : 95% Protection against over-voltage and reverse polarity Isolation Voltage : 2KVef by 1 sec Supply Voltage : 5 to 30Vdc Electrical Connections cable, connector or terminal block Mechanical Features Of Hollow Shaft Encoders Circular aluminum housing with fixing by own axis Shaft : stainless steel Maximum Speed : 6000 RPM Hole diameter internal shaft : 6 to 25mm Shaft Seal : Seal Moment of inertia : 120g cm 2 Torque (moment of departure) : 3Kgf cm Vibration : Maximum Strength In Axis : 2x103 Kgf axial, radial 2x103 Kgf Degree Of Sealing : IP 66 and IP 67 Dimensions : 100 mm diameter, 63 mm thick Weight : 1.0 kg